Search the forum,

Discuss Outside service pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

Kieren

Hi,

We live in a rural area where our service pipe runs from the road under two fields and into our house. In April a section of the pipe sprang a leak which I had a company out to fix, south west water paid £100 and i paid the princely sum of £400....

Anyway we have just been told by our neighbour that it looks like the pipe is leaking again from a new location.

What i'd like to know is how difficult it would be for me to fix. The pipe isn't deep maybe a couple of feet, the last time the company got a digger but it was like the somme so I couldn't blame them for that.

I was thinking of digging down, having a look at the pipe, seeing how big the hole/leak is, measuring the pipe, cutting out the affected area and fitting a compression coupler joining the 2 pipes back together.

Does that seem reasonable? I figure that at the very least i would have saved a bit of time by digging the hole for them. If I went ahead what tools do you think I would need, save shovel and coupler.

Many thanks.
 
Consider, is it a shared pipe and is the leak on your land?
 
The hardest thing is finding the exact location of the pipe.
It's not always directly below the leak.
You may have a bit of digging to do.
 
Is it metal or plastic pipe? Could a pinger be attached at the end for use with a pipe tracer? Specialist pipe tracing equipment can be hired or if metal maybe a simple metal detector might help in finding the pipe.

If it comes to replacing a lot of length need to be sure their aren't other services next to the water pipe. Moling might be cheaper than digging, at least check out.
 
Status
Not open for further replies.

Reply to Outside service pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
211
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
265
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
231
P
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
283
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
499
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock