C
Colin Brendan
Is it ok to do this? I have never soldered and auto vents are too large.
Thanks
Colin
(Compression coupler)
Thanks
Colin
(Compression coupler)
Discuss Manual air vent made with 15mm x 1/2inch coupler and rad air vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Manual air vent made with 15mm x 1/2inch coupler and rad air vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Dear professionals, could someone kindly advise on per below issue, please let me know if more pictures or details needed. I think my Auto Air...
Hi, I'm new to the forum and just some background on myself. I have 4 years experience as a plumber but haven't worked in the trade in 15 years. I...
Hey guys in the know. I have paid for a heating and plumbing contract and had to pay my excess 3 times for the same thing still not fixed.
The...
Hi, I am replacing our 11 year old boiler (due to H.Ex. leak) with a new one. This is in a "sealed" system with red expansion vessel in airig...
Hi
I recently did some pipe insulating in my loft.
The only two I didn't do were the vent pipes. Not sure if that is the right term for them...
