Search the forum,

Discuss Makita 4.0 combi drill Screwfix £119.99 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Phil

Plumbers Arms member
Plumber
Messages
4,240
http://www.NoLinkingToThis/p/makita-dhp456smij-18v-4-0ah-li-ion-lxt-cordless-combi-drill/6948h

I can't afford not to buy it.
 
That is very cheap.
But I burnt the same model drill out in 2 days! It's a diy drill that can be bought for £50 ( bare) even though, the battery and charger would cost that. Just don't expect to be drilling a 25mm auger bit through 20 joists.:hand:
 
By no means a main drill but I've been looking at a 4.0 battery (I only have 3.0).
 
Last edited:
this is the one you want

http://www.NoLinkingToThis/p/makita-dhp481rtj-18v-5ah-li-ion-cordless-combi-drill-brushless/2528f
 
I was in B&Q yesterday and they have some killer deals on dewalt XR stuff..
 
You can buy 4Ah replica batteries for less than £30 on amazon/ebay and IMO are just as good. I've had a 3 of them for a few years and cant tell the difference between the replicas and the real McCoy.
 
Status
Not open for further replies.

Reply to Makita 4.0 combi drill Screwfix £119.99 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
250
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
874
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
91
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
94
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock