Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Installing wood burning stove and relocating oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mrandyquin

Hi,

I am looking to move my oil boiler into an enclosure outside and place a wood burning stove where my old boiler was situated.

Can the original stainless flue from the boiler be used for the stove?

Thanks for any advice
 
I'm still waiting on local people getting back to me and coming to view, I had planned to have the floors tracked new coper pipe in place for the boiler etc.. to make the install quicker and meaning we would have less downtime as regards heat goes.

I will definitey have a professional install the stove as my families safety comes first but I just looked at the pipes and it looks very similar to what I would be buying from a stove supplier.

I've attached a picture of the pipe that runs through the house IMG_3254.jpg
 
I'm still waiting on local people getting back to me and coming to view, I had planned to have the floors tracked new coper pipe in place for the boiler etc.. to make the install quicker and meaning we would have less downtime as regards heat goes.

This is something for you to talk to your man about then if he agrees you can do the pipes in the time between the quote and the start date but surely the pipes would need to be left exposed until the final checks had been done.
 
As I said yeah I will be consulting a plumber infact I'm expecting a call back in the next hour. I will only be tracking the floors for new pipes but leaving them exposed for the time being. I was just curious if it was the same type flue used for both applications.

I only meant that if I had the floors tracked and pipes ran to new location then my family would have less downtime without heat which obviously has to be a priority
 
I think what the guys are alluding to is that you need an expert to confirm the flues suitability for reuse. It's not just a case of here's a flue let's use it
 
It's more the fact you want to track floors that worries me.

Talk to your guy. You're barking up the wrong tree at the moment.
 
Status
Not open for further replies.

Reply to Installing wood burning stove and relocating oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
127
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
205
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
313
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
278
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
240
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock