Search the forum,

Discuss In need of a mentor "ACS" Langley, Birmingham in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
Hi Guys
My name is Steve, 46 years Old.
Im new to this forum so please bare with me if I state the obvious. Thanks..

I live in Langley, Birmingham and I'm looking for a Gas safe registered mentor!

Im aware you guys probably get asked this question all the time, but I'm going to try my luck anyway, you never know I may be useful.
Im training at the Jubilee centre in Birmingham on a two week on, two week off basis!
Im half way through the 1st stage - 4 weeks in 4 to go.
I should be completed by mid December and ready to build my portfolio in January!

I know its a long shot, but is anybody interested in taking me alongside them to learn the ropes and help me build the portfolio I need?
I would be available 3-4 days per week and I don't mind getting my hands dirty.
Im running a business so the rest of my working week would be dedicated to that.
Im poly phase qualified spark so I know my way around challenges and you only have to show me how to do something once. After that Im generally good to go.

Besides, It could be advantageous having me around as I could sort any Electrical problems your customer may have.
I wouldn't be expecting any payment for working alongside you. I would be grateful for the opportunity to learn.

Hope we can help each other out!

Thanks for your consideration.

Best wishes

Steve King
 

Reply to In need of a mentor "ACS" Langley, Birmingham in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
114
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
498
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock