Search the forum,

Ideal Standard Toilet Seat Advice

Post new thread

Discuss Ideal Standard Toilet Seat Advice in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

F

Flookz

Messages
10
Hello, I have a customer that has a 39-year-old Ideal Standard toilet. They would like to replace the toilet seat. But the hinges are fixed on an angle not flat like on a standard toilet. I have attached some pictures.

Has anyone replaced a toilet seat with a set up like this? Or have any advice on what type of toilet seat would work. I’m guessing a toilet seat that goes all the way back would work. Rather than a toilet seat that is restricted to a certain range of movement.

Thanks
 

Attachments

  • 43A52B0A-B9C6-409A-83ED-65F757967567.jpeg
    43A52B0A-B9C6-409A-83ED-65F757967567.jpeg
    201.5 KB · Views: 15
  • 7C8AD5A1-834F-43B1-870F-545A3DD8AC3E.jpeg
    7C8AD5A1-834F-43B1-870F-545A3DD8AC3E.jpeg
    198.6 KB · Views: 16
  • 46653E83-A91E-4B52-AC40-81716B81C26C.jpeg
    46653E83-A91E-4B52-AC40-81716B81C26C.jpeg
    346.4 KB · Views: 15
Looks like it should have arectangular seat on it, not the standard looking one.

Looks similar to Ideal Michelangello

Replacement Toilet Seats | Choice Replacement Toilet Seat Shop

www.choicereplacementtoiletseatshop.co.uk www.choicereplacementtoiletseatshop.co.uk

Ignore the colour, the brackets look angled on this,WC Seat.PNG

Also

Michelangelo ORIGINAL Toilet seats

Michelangelo ORIGINAL Toilet seats
www.colouredbathrooms.co.uk www.colouredbathrooms.co.uk


www.mytoiletspares.co.uk

Ideal Standard Michelangelo Toilet Seat K700501 Ideal Standard White 4015413091077

Ideal Standard Michelangelo Toilet Seat K700501 Ideal Standard WhiteMichelangelo Toilet Seat K700501 this seat is no longer made we only have Limited Stock
www.mytoiletspares.co.uk www.mytoiletspares.co.uk
 
Last edited:
Someone has previously replaced the seat with an incorrect shape and colour. Try contacting Ideal Standard:

www.idealstandard.co.uk

Contact & Service | About Us | Ideal Standard

Ideal Standards Customer Care representatives are always happy to help you with any question that you may have. Get in touch with by phone or e-mail.
www.idealstandard.co.uk www.idealstandard.co.uk

who should be able to identify the correct part.
 

Reply to Ideal Standard Toilet Seat Advice in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
479
Chuck
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Chuck
C
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
221
oz-plumber
O
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
139
John.g
J
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
191
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock