Search the forum,

Discuss I get myself in a muddle sometimes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Another kitchen upgrade started FFS I get myself in a muddle o_O.kop
 

Attachments

  • IMG_20190608_120918.jpg
    IMG_20190608_120918.jpg
    1.7 MB · Views: 41
  • IMG_20190827_114651.jpg
    IMG_20190827_114651.jpg
    1.9 MB · Views: 44
  • IMG_20190828_094955.jpg
    IMG_20190828_094955.jpg
    2 MB · Views: 42
Yep 2 of us bud I am doing the prep work and then work in together next week cleaned all the crap off now insulation board going on external wall :):)
 

Attachments

  • 15671531284008138779463654062525.jpg
    15671531284008138779463654062525.jpg
    1.2 MB · Views: 38
Looks good, did you remove the plasterboard or install it over the top ?
 
A day and a half should see me done here been alot of stuff done some of these smaller jobs take just as long have a good weekend chaps .kop
 

Attachments

  • IMG_20190906_165849.jpg
    IMG_20190906_165849.jpg
    1.5 MB · Views: 16
  • IMG_20190906_165742.jpg
    IMG_20190906_165742.jpg
    1.4 MB · Views: 13
Looking good kop what’s the splash a panel or a worktop ?
 
9mm panel Shaun just the top and bottom of the boiler to sort out , and the kickboards few other little jobs then I will be done , used multi panel flooring a first for me 5mm thick click vinyl piece of cake to fit put underlay down first and just clicks in place . Cheers Wayne
 
9mm panel Shaun just the top and bottom of the boiler to sort out , and the kickboards few other little jobs then I will be done , used multi panel flooring a first for me 5mm thick click vinyl piece of cake to fit put underlay down first and just clicks in place . Cheers Wayne

Looks good quite like the panelling :D
 

Reply to I get myself in a muddle sometimes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
354
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
354
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
147
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
209
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
180
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock