Search the forum,

Hive multi-zone wireless heating

Post new thread

Discuss Hive multi-zone wireless heating in the Plumbing Zone area at PlumbersForums.net

R

Raymondo

Messages
1
I want to buy a Hive wireless multi-zone system
I have a dual-zone wireless system. A combi boiler plus a hot water cylinder.
What do I need to buy from Hive?
What's the cost to install?

Ray
 

Reply to Hive multi-zone wireless heating in the Plumbing Zone area at PlumbersForums.net

Similar plumbing topics

D
TRV valve body compatibility with Hive?
Hi I am trying to fit a Hive Radiator valve into my existing TRV valve body to make them automatic so have bought a Hive valve to try it out. I have done this before in another install but the valves were Danfoss and directly compatible with Hive. I am looking for an adapter that will be able...
Replies
1
Views
356
ShaunCorbs
ShaunCorbs
P
ideal c35 independent
I just installed second zone onto my ideal independent c35 original I had one hive thermostat now I added two two port valves ( with Bypass) and two hive thermostat V3 it wired into a wiring centre looking at the wiring on the boiler shall I put back the room stat/ timer loop back in as...
Replies
4
Views
428
Pete st neots
P
W
Can I have single zone central heating when pipe installed for 2 zone?
A bit of clarification - I have extended a 3 bedroom semi detached and at the time central heating pipes were going in I told the plumber could I have 2 zones - one for bedrooms upstairs and another for the living areas downstairs. Now the plastering has been finished and I am costing the combi...
Replies
0
Views
456
waynetr
W
N
Hive Heating & Hotwater install to Vaillant Thermocompact VU GB 242/1
Hi, I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler. It has an internal programmer that is similar to a time switch 120 (plug in seven day programmer) This programmer is connect to a terminal strip using 345 (three...
Replies
0
Views
412
Nitesh Bharadia
N
G
Vaillant Controls - is it possible to mix wired and wireless?
We have an all Vaillant setup - an EcoTEC Plus 637 system boiler plus wired VR720 and VR92 SensoCOMFORT controller, driving two CH zones plus DHW. It all works, but unfortunately we have found that the room stats are poorly located, and so the level of control is not what it should be. We had...
Replies
4
Views
558
gndurant
G
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock