Search the forum,

Discuss Has anybody fitted a Shower Power Booster?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Came across one pair so far, person said they were very happy with them. I think they bought them in Fayers
 
Yes I fitted one earlier this year only boosts by 0.4 bar but was ideal for the what it was feeding. It is very quiet and doesn't need hardly any space. The only thing that was a problem was the first transformer packed up on it after a couple of days but they sent out a replacement straight away.
 
I fitted a pair to an electric shower that had been accidentally fed via a cold water storage tank. Worked perfectly, boosted the water pressure enough to make the shower work correctly.
 
fitted two sets on two separate jobs on low pressure showers. boosted them enough to make them ok. not anywhere near as good as a dedicated shower pump but better than nothing very easy to fit and low power consumption can be run off a lighting circuit.
 
Had some feedback from my uncle who I recommended a pair of these too, he installed the hot side to his shower first, turned it on and nothing, checked a couple of things then phoned flowflex up, couldn't get much help from them as the guy who deals with these pumps was off. anyway he was put through to inventor and he finally told my uncle to swap the one on the pipe to the one he hadn't put onto the cold yet(he bought two seperate ones not the two linked together) worked fine, he got back on the phone to arrange a return/replacement and all fine he was even been given ÂŁ30 back, but still waiting on replacement 9 days later, haven't spoke with him since but when he told me the story I told him to get straight on the phone to them as they deliver next day when he first ordered. since this is the second problem out of two orders I know about there maybe some teething problems.
 
Status
Not open for further replies.

Reply to Has anybody fitted a Shower Power Booster?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
144
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
166
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
246
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
159
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock