Glow worm anyone?

[buckley plumb]

how does it rot if its plastic . seen a few flexicoms with a white water mark on the bottom rh corner but always dry

 

[mfgs]

I'll keep that as a second option, I'll be honest and say I'd rather they replaced it as it's pretty rotten

If glowworm will fix it for free then let the customer know. You will have a happy and very loyal customer due to your honesty.

 

[dave1]

The gas pipe is showing a nice bit of corrosion there too, I've mentioned this in other flexicoms posts you need to check the front flue hood and top flue hood assembly these are both common faults.

 

[buckley plumb]

The gas pipe is showing a nice bit of corrosion there too, I've mentioned this in other flexicoms posts you need to check the front flue hood and top flue hood assembly these are both common faults.

any pics of where to check dave

 

[IDCHAPPY]

No one is in the property just now and they have given me the go ahead to change it.
Yeah glow worm could replace the plastic bit but the case is stuffed, it took me 5 mins just to prize the front of the casing off.

 

[buckley plumb]

save the good bits mate as glowworm parts are getting expensive

 

[dave1]

front flue hood

top flue hood also the seal goes right at the back

sump

 

[IDCHAPPY]

save the good bits mate as glowworm parts are getting expensive

Fan, PCB, Gas valve, depends what else looks decent when i get it out i suppose buddy

 

[buckley plumb]

View attachment 17697 front flue hood

View attachment 17698 top flue hood also the seal goes right at the back

View attachment 17699 sump

so they are leaking from most of the blow mold injection points from manufacture process