Search the forum,

Discuss FSD on hobs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
When testing FSD's and hearing the 'click' a lot of hobs I test don't seem to have these, they are usually old so is that the reason? I have been putting NA on the landlord safety certificates a they don't appear to be present.

Is that correct?
 
Why would you class it as NCS?

Unless it is in a flat, there is no requirement for the hob to have a safety device.
 
I wasn't sure if it was a requirement for cookers/hobs etc to have a safety device. Did look it up but couldn't see anything.

If no requirement for it I'll continue to put N/A.
 
Why would you class it as NCS?

Unless it is in a flat, there is no requirement for the hob to have a safety device.

thanks, i thought i was missing something out for a moment there!@~@

only applicable for new installations in shared dwelling is my take on it!, otherwise ncs.
i just mark na on the form..
 
Multi occupancy dwellings is ncs! Bit of a silly one that think. A gas explosion is just as dangerous in a semi detached as a flat ! Should be ncs full stop.
 
Status
Not open for further replies.

Reply to FSD on hobs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
536
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
209
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
195
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
262
PSxxxxxx
P
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
312
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock