Discuss flue gas heat recovery unit ,for Worcester cdi range in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

carrpaul

Gas Engineer
Messages
97
hi there been looking for prices for a flue heat recovery unit for Worcester cdi range and can find any
if you could point me in the right direction , would be much appricated .
 
7 733 600 047 : this is the product number off Worcester home page , can't seem to find prices any where i am guessing around
£900.00
 
Looks like an addition to a standard efficiency boiler to try and turn it into a he.
 
Hi if your getting a new boiler and want one fitted get the Atag fantastic product and so solid
If the Worcester is already fitted not worth fitting as the payback would take years
Good luck
 
Status
Not open for further replies.

Reply to flue gas heat recovery unit ,for Worcester cdi range in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
334
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
333
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
326
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
343
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
241
Back
Top