Search the forum,

BS5412 CD XZ 24 Cartridge

Post new thread

Discuss BS5412 CD XZ 24 Cartridge in the Ireland area at PlumbersForums.net

T

tonypinkface

Messages
2
I need to replace a kitchen tap cartridge.

The code stamped on existing cartridge is BS5412 CD XZ 24.
I've tried this code with Screwfix, B&Q and Tap Magician - they've all provided a cartridge that fits the tap, but is actually not compatible with the handle/shroud itself!!

The splines I am receiving are 8mm in diameter, which is too small.
Existing cartridge looks like 10mm dia spline - I'm unable to find anything to match this, even online.

Help!
 
Last edited:
best option is to phone bristan up give the model no of the tap and they should have stock to send out
 

Reply to BS5412 CD XZ 24 Cartridge in the Ireland area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
295
Bp89
B
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
225
DIwhYdidIstartThis
D
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
97
Lou
Lou
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
182
pritchardsplumbing
P
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
113
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock