Armaflex lagging

[mfgs]

Does anyone know which merchants stock armaflex lagging? Need to pick some up first thing tomorrow for a 32mm water main.

 

[Ermintrude]

Crosslings. BSS and drain center

 

[mutley racers]

So is it alright to run a water main externally?

 

[mutley racers]

I have put it in rain water pipes with insulation before but just insulating is ok is it

 

[mfgs]

Its underground but cant get it down to under 750 so need to lag it.

 

[mutley racers]

I see. What was the original size pipe and flow rate and pressure and what Is it with a 32mm main? Interesting to know for future. Also, did you get a small enough unvented cylinder for your last post

 

[mfgs]

I see. What was the original size pipe and flow rate and pressure and what Is it with a 32mm main? Interesting to know for future. Also, did you get a small enough unvented cylinder for your last post

Existing is an old lead main, got about 18 ltrs/min at 2 bar. Got the 32mm main, and tws mainsboost plus accumulator going in so when its all up and running I will let you know. No I couldn't find an unvented to fit the space to had to get the architect to redesign the boiler and cylinder locations as they were optimistic at best.

 

[Ch4 plumbing]

Was the fat max too big?

 

[mfgs]

Was the fat max too big?

It was a bit tight and really needed a 300 Litre as there is going to be 3 or possibly 4 bathrooms. The architect has redesigned it now and come up with another location in which a standard 300Litre cylinder will fit so I am happy.

 

[Reg Man]

AF/Armaflex class 0 with tuff coat R protection. Screwfix.