- Messages
- 27
Anybody been using Midland lead and found it’s curved when you roll it out? Had this happen to me on 2 different jobs with lead bought from 2 different suppliers! Only thing in common is it’s made by midland lead. Both 390 code 5
Discuss Anybody experience s&*t lead made by midland lead? in the USA area at PlumbersForums.net
As L-P., I'd say it's been stored badly, probably the bottom layer on a wooden pallet and its collapsed.
Or it's been dropped from height.
I doubt the mill it was rolled on is capable of producing curved sheet.
The irony is if you wanted a sheet with a slight curve in it you wouldn't be able to buy one.
Yes it’s crap stuff. “100% recycled” was the 1st lot. Tinny crap. More Tin than lead!!! I never bought it and wouldn’t buy that s#*t. You’ll never beat Caulder lead.That’s cheap cast lead. We always use milled lead.
screw your supplier down and that’s what they give you
Reply to Anybody experience s&*t lead made by midland lead? in the USA area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.