Discuss Alternative to a Worchester 400 highflow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

gingalig

Gas Engineer
Messages
217
Hi, I have a customer that has a high flow 400 in a fairly large bungalow and it’s on its last legs, worchester have stopped making parts for it so time for a replacement, the customer doesn’t want a cylinder and would prefer a wall hung boiler but I’m getting a bit lost in choices, I’m conscious that they don’t want to downgrade anything that they already have, the 400 has a flow rate of up to 20lts/min and the alternatives that are wall hung seem to come in at around 15lts/min. Any suggestions? and would the difference in terms of a shower be noticeable. ? I have suggested a high flow 440 but they don’t seem very keen. Thank you in advance for any help/suggestions.
 
Vaillant storage combi
WB 42cdi
ATAG 39 economiser
 
Thank you, the Viessmann looks pretty well suited and I’m not sure how I managed to miss the Vaillant, I usually work on smaller scale systems, I’ll put the choice between these and the 440 to them.
 
Viessmann for me but you will require a hand to mount
 
Worcester floor standing for me and I hate Worcester’s about to take a 400 out myself
 
Is it me or is the flue an absolute nightmare in the hiflows?
 
Fitting the new flue is not easy.
You have to get three bolts on from inside the boiler.
Which means taking most of it apart then you need to get your hands into rediculous places that you can't see so feeling around like a blind man.
 
I've not fitted a storage combi, is the 20l/m genuine and are they really capable of supplying two bathrooms with ease ?
 
one of the 111 we fitted supplied 3 showers with no problem all at same time
 
one of the 111 we fitted supplied 3 showers with no problem all at same time

aslong as you have the mains to back it up
 
I've not fitted a storage combi, is the 20l/m genuine and are they really capable of supplying two bathrooms with ease ?
Until the store has been used then it just works as a normal combi
 
Until the store has been used then it just works as a normal combi

same as an unvented cylinder then least with a storage combi you will have some hot water
 
The house in question , I mean is there a bath ? Mixer showers , electric showers ,,, Depending on what's in the house would let u know if you'd get away with a combi that doesn't have any storage but still has 17lpm flow rate , wall hung Worcester cdi42kw or vogue 40kw both around 17lpm he but no storage of hw,
 
Status
Not open for further replies.

Reply to Alternative to a Worchester 400 highflow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
  • Locked
My mother has a rented-out property at the above postcode. She's lives abroad and is stuck, and I am in a similar situation. Existing boiler is...
Replies
0
Views
1K
I have done a extensive research and watched hours of videos about all of them and looking for the most suitable boiler for our house. The house...
Replies
8
Views
5K
Hi All, Hope you and your families are well. Our boiler in the family home is on its last legs. Our family home: Has a Halstead Iheat 35c. It...
Replies
4
Views
2K
Hi, Any help, advice or personal experience appreciated. We are supplied by a lead pipe but on a shared supply. I am about house 4 out of a run...
Replies
8
Views
3K
hi all You may remember sometime ago I posted about radiator leaking a year later on new build... Well the same developer has now been on my...
Replies
28
Views
205
Back
Top