Advise on Fernox F1 ( Is this Suitable for my system ? )

[Richard at Home]

I have just read the instructions on the bottle and it states this is "not suitable for single feed Indirect Cylinders"

My system is an open vented system run from a Vaillant 438 System Boiler

I have 1 Hot water Tank heated through a "Y" Plan and approx 13 Rads

Is this product suitable for my system

I am asking as i think my system is a single feed indirect cylinder. Or does this statement mean don't actually put it in the cylinder

Thanks

Richard

 

[Tjdservices]

Maybe you could post a picture? If you are unsure you should think about calling a plumber who will be able to either advise that your system is suitable and if it is treat the system for you. Can I point out that you would never treat a heating system via the cylinder as that is your hot water store for the house.

 

[SilentMike]

How many tanks have you got in the loft?

 

[gassafe]

Single feed indirect cylinders are rare...

If you have a large roof tank & a smaller roof tank for central heating then you don't have a single feed indirect cylinder...

 

[Dotty]

If you are unsure you should think about calling a plumber who will be able to either advise that your system is suitable and if it is treat the system for you.

You're barking up the wrong tree with that advice on this thread.......