Adey magnaclean professional 2

[jaydebruyne]

does anyone else think the 'trigger' is the most stupid idea??

Had to remove one to attach my powerflush machine yesterday, admittedly the space was tight.. but push fit over time is always a nightmare to get off.. why put that stupid plastic thing in the way!!!!

 

[ShaunCorbs]

its there for a reason

tighten the red wheel back on its self (away fro the magna pot)

and then squeeze the "plastic thing" aginst the body to the magna clean and pull, the bottle should remove easy

 

[mfgs]

its there for a reason

tighten the red wheel back on its self (away fro the magna pot)

and then squeeze the "plastic thing" aginst the body to the magna clean and pull, the bottle should remove easy

What he said, it actually makes it quite easy to remove.

 

[jaydebruyne]

its there for a reason

tighten the red wheel back on its self (away fro the magna pot)

and then squeeze the "plastic thing" aginst the body to the magna clean and pull, the bottle should remove easy

Yeah I did that.. wasn't budging.. had to use a screwdriver to push the lugs in on the push fit connectors and pull it back in half millimetre segments lol took a while

 

[ShaunCorbs]

Yeah I did that.. wasn't budging.. had to use a screwdriver to push the lugs in on the push fit connectors and pull it back in half millimetre segments lol took a while

thats strange, there wasnt any pressure on it (eg you had removed the cap)

also did you try pushing it forward first, the squeezing locking ring and pulling off?

have had one stuck yet (touch wood)

 

[jaydebruyne]

thats strange, there wasnt any pressure on it (eg you had removed the cap)

also did you try pushing it forward first, the squeezing locking ring and pulling off?

have had one stuck yet (touch wood)

Yeah I completely emptied the canister, took out the magnet even and tried again. Had to call adey in the end cos I thought I was being an idiot. They said sometimes it does take a 'tug'.. but this thing was like it was nearly seized on.. tried pushing it forward a couple times to see if I'd actually made any progress lol but no.. got it off in the end though and had to grease the o-rings as they wouldn't push back on.

 

[ShaunCorbs]

Yeah I completely emptied the canister, took out the magnet even and tried again. Had to call adey in the end cos I thought I was being an idiot. They said sometimes it does take a 'tug'.. but this thing was like it was nearly seized on.. tried pushing it forward a couple times to see if I'd actually made any progress lol but no.. got it off in the end though and had to grease the o-rings as they wouldn't push back on.

that is a werid one, once you removed it any crud on the brass tails ?

 

[Harvest Fields]

That is strange. I have been fitting these ages and never had an issue. However I have not had to remove many after fitting. I love these, they are all I fit now. If you are doing a powerflush then I presume you did not fit it originally?

 

[jaydebruyne]

that is a werid one, once you removed it any crud on the brass tails ?

A little.. not crusty though.. just wiped it off

 

[Darren Jackson]

I like these so much that they are all I fit. Not yet had a problem with any, but then never had to take one back out.