Search the forum,

Discuss ACS Passed this week! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Davo

How long have people found the certificates usually take :-D
 
bpec centre has 10 working days to process and send to head office who have 20 working days to process and send to GSR, current timescales are 3-5 days for us and less than 8 from bpec at Derby but it all depends on workloads at each place
 
3-4 weeks for me. Was told it would be 2 weeks. Don't be dissapointed.
 
3-4 weeks for me. Was told it would be 2 weeks. Don't be dissapointed.

i tell everyone within 30 working days (which is bpec scheme rules but it never takes that long), then when they get them in 2 weeks they are delighted, its crazy telling you 2 weeks as the centre cannot know how much paperwork the accrediation body will have to do from centres all over the country
 
Status
Not open for further replies.

Reply to ACS Passed this week! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
338
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
251
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
203
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock