HALL of SHAME PHOTo`s

Post new thread
  • Thread starter Barry98
  • Start date
  • Replies 3K
  • Views 596K

Discuss HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
ShaunCorbs said:
non gas safe eng decides to pipe up his new boiler

Cq9GSiHWgAAppFf.jpg


now with the exact kit hes got what would you of done

i would of dropped the boiler and re cored the flue and made things nice and fit the kit vertical
Click to expand...

w...ww..wow
 
Floating pot expansion vessel

image.jpg

Nothing holding it up but the pipe 22l vessel so you know the weight when full timber !!!!!
 
IMG_20160928_134019.jpg
Lead gas pipe still connected. Gas fire never serviced properly

Restricted supply!
 
Last edited:
The unilite isn't a £5 or a £15 Halfords think mine cost £30-40, rechargeable led, good but dims after not a long use, I've got a Peli safety that lasts days far better
 
It is indeed a unilite. I have not noticed mine dimming really. i use it for around 30 mins to an hour a time on longer jobs. It then gets plugged into the van for a recharge. The one in the picture is one of the newer 600 lumens torches. It is a cracking bit of kit. What model Peli torch do you have Stani? I will give one a go.
 
I'm too cheap to be spending that sort of money. I use a cree pencil light for inspection, bright as the sun and cheap as I have a few dotted about the place. Can take a few weeks to arrive from China though...

[DLMURL]https://www.amazon.co.uk/UK-DIRECT%C2%AECREE-Lumens-Flashlight-Zoomable-Torch/dp/B00QKG7EKC/ref=aag_m_pw_dp?ie=UTF8&m=A35RFWRBAA3IZ[/DLMURL]
 
Last edited by a moderator:
Good old gas app engy thinks this is acceptable and good

image.jpg
 
So i'm back from Northern Ireland after doing the new McDonald's in Banbridge and here is my two hall of shame's I found whilst staying in a guest house.



 
I bought a tile cutter like that a few years ago. Every tile was wonky. Took the cheap pos back
 
20161108_103831.jpg Took a double take when I walked in and saw this cistern feed arrangement and don`t get me started on the sani discharge pipe!
 
Last edited:
Had a problem at a site where they had limited roof space above a kitchen, canopy was too small and original inline extract fan wasn't up to the job. Replaced it with a biga$$ roof fan and got manufacturers to extend the canopy to where it should be. Sent testing bod down to check all is working proper like......

Testing bod: "I've got a problem with the kitchen canopy, the extract rate sucks."
Me: "Try testing it with the grease filters out"
Testing bod: "Why can I see roof timbers?"
Canopy%20plenum2_zpsjnnrceyc.jpg
 
New posts
Status
Not open for further replies.

Reply to HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

G
Is this capped off correctly?
Good afternoon all, First time posting on this site. I’m need of some opinions from Gas engineers if possible. My house is 1930s (I think). I...
Replies
1
Views
516
Gasmk1
Gasmk1
S
Sporadic Hot Water - Unvented indirect
Good Afternoon all, I am hopeful someone may be able to offer some guidance on the following. In the home we have a gas boiler (serviced...
Replies
5
Views
533
Basher
B
J
Why do I hear a hammer related noise coming from my water pipes?
This issue arose about a year ago. Does anyone have an idea why I occasionally hear (about once every hour or longer) a hammer related noise...
Replies
0
Views
407
Jackson710
J
L
How to locate the cause of sewage smell?
My living room smells like a sewer but I can't tell where it is coming from. Not sure where to start looking. The saniflo discharge pipe runs...
Replies
1
Views
142
Lou
Lou
G
Vaillant Controls - is it possible to mix wired and wireless?
We have an all Vaillant setup - an EcoTEC Plus 637 system boiler plus wired VR720 and VR92 SensoCOMFORT controller, driving two CH zones plus DHW...
Replies
4
Views
606
gndurant
G

Newest Plumbing Threads

Back
Top