Search the forum,

Discuss Will doing this blow up the heating system? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tom_B

Hi Everyone,

My CH system has a an underfloor heating loop in the kitchen. What I want to do is run the UFH 24 hours with its own control system. The Glow worm 38cxi boiler only has one circulation pump so can I fit a motor valve into the radiator circuit and control it with a wireless thermostat? Is there enough of a loop that the circulation pump will be ok or will bad things happen?

I have attached a picture of the boiler layout.

thanks!

Tom
 

Attachments

  • IMG_0102.JPG
    IMG_0102.JPG
    650.1 KB · Views: 24
Hi Tom, your Gloworm has its own internal circulator pump and the ZRU of your UFH also has its own circulator pump. So you can have two separate zones by installing a motorised valve and a room thermostat. Just make sure you also include a differential automatic bypass as well and it won't blow up.
 
Hi Darren,

Thanks for your reply, so the differential bypass valve would go in just before the motor valve and bridge the flow and return pipes?
 
Brilliant - thanks Darren, I guessed something like that would be necessary, your help is much appreciated.
 
Status
Not open for further replies.

Reply to Will doing this blow up the heating system? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
481
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
265
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
207
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock