Search the forum,

Discuss Who makes this kitchen mixer tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Tearing my hair out trying to find out who makes this kitchen mixer tap. Need to order some spare parts but no idea who makes it. I think it came from B and Q but couldn't be certain.

Here's a picture. Anyone any ideas??

upload_2017-12-18_20-37-30.png
 
I think Bristan tend to have a model number on the reverse near where the spout svivel thing is. 5 or 6ish digit code?
 
Tearing my hair out trying to find out who makes this kitchen mixer tap. Need to order some spare parts but no idea who makes it. I think it came from B and Q but couldn't be certain.

Here's a picture. Anyone any ideas??

View attachment 32355
Ive had a few problems in my 57 years to tear my hair out over, a tap would not be one of them!!
 
Status
Not open for further replies.

Reply to Who makes this kitchen mixer tap? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
82
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
192
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
314
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
233
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
64
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock