Discuss Water leak Worcester Bosch Heatslave 25/32 External in the Oil and Solid Fuel Forum area at PlumbersForums.net

Messages
86
Noticed today that the ground looked damp around the outside of our Worcester Bosch Heatslave 25/32 External Boiler. Took the cover off and warm water is pooling in the base of the unit. Can't see an obvious leak and all the components are dry. I'm guessing it's the thermal store leaking. Is there any way to confirm this, and if it is the thermal store is the boiler kaput or can it be replaced? No fault codes and boiler is working.
 
Found the leak, it's the part with the spring clips in the attached pic. What is it and is it a possible DIY replacement/repair or will I need an engineer?
 

Attachments

  • leak.jpg
    leak.jpg
    451.3 KB · Views: 20
It connects to the right side of the heat exchanger looking down from the top with the top cover off. Looking at the parts in the installation manual it's the housing for the DHW pressure relief valve that connects to the heat exchanger.
 
Last edited:
So it's not the housing that's leaking, I removed the pressure relief valve and it's plastic housing, and it has an o-ring, that seems ok, but a washer came out as well, don't know where from but that's cracked and perished, maybe that's the problem?
 

Attachments

  • bits.jpg
    bits.jpg
    283.6 KB · Views: 19
Found a similar thread on here, don't know if they fixed it or not. Here's a pic of the weird washer that I found when I took out the pressure relief valve. It's 20mm outer diameter 10mm inner and about 1.5mm thick. Don't think it's fibre but might be.
 

Attachments

  • washer.jpg
    washer.jpg
    154.5 KB · Views: 14
That particular boiler is probably the worst oil boiler on the market, an absolute pile of poop. I wont even go out to them anymore.
Totally agree absolute rubbish we also refuse to work on them
As for new ones don't fit anything that begins with a W
Grant have recently extended warranty on vortex pro to 10 years.
 

Reply to Water leak Worcester Bosch Heatslave 25/32 External in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Help Please We have a 2005 Worcester Bosch Oil Heatslave 26/32 that is fitted with the optional timer. Recently we have a problem. To get either...
Replies
2
Views
538
  • Question
Hi everyone, we have low hot water pressure in the entire house. It doesn’t appear to be a problem with the boiler. A Heatslave 25/32 External...
Replies
0
Views
427
A
  • Question
We have low hot water pressure in the entire house. Boiler is a Heatslave External 25/32, fuel in kerosene. The central heating is still working...
Replies
0
Views
296
Abram R
A
Heatslave II 25/32 water leak from PHE Inlet block. When DHW PRV fitting was removed a white flat seal/washer was found in 3 pieces. This seal is...
Replies
17
Views
2K
I have a Worcester Bosch Oil Heatslave 26/32 which is about 17 years old. It has developed a fault that has come in stages so it might be more...
Replies
10
Views
6K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock