Search the forum,

Discuss Vertical flue/ roofing query?? in the Gas Engineers Forum area at PlumbersForums.net

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi guys.
How many of you use a roofer to help with vertical flue installations, or do you rather do it yourself??
I’m not one for heights so would rather not if possible.
 
I do it myself but I’m good with heights etc if your unsure get a roofer normally around £60-£70 for them to do the lot
 
I do it myself but I’m good with heights etc if your unsure get a roofer normally around £60-£70 for them to do the lot
Blimey. Is that all? I thought it’d be a fair bit more than that tbh. Would they just drop it in and weather it regardless of whether you’re ready to do the flue?? I’ve always worked with a colleague who would go on the roof while I line it up inside.
 
Depends on there availability etc
 

Reply to Vertical flue/ roofing query?? in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
225
Show us your fanciest radiators you've installed! We would love to see them! I love this Milano vertical radiator in the kitchen space. What do you think?
Replies
4
Views
223
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
313
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
286
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock