Search the forum,

Discuss Vertical flue/ roofing query?? in the Gas Engineers Forum area at PlumbersForums.net

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi guys.
How many of you use a roofer to help with vertical flue installations, or do you rather do it yourself??
I’m not one for heights so would rather not if possible.
 
I do it myself but I’m good with heights etc if your unsure get a roofer normally around £60-£70 for them to do the lot
 
I do it myself but I’m good with heights etc if your unsure get a roofer normally around £60-£70 for them to do the lot
Blimey. Is that all? I thought it’d be a fair bit more than that tbh. Would they just drop it in and weather it regardless of whether you’re ready to do the flue?? I’ve always worked with a colleague who would go on the roof while I line it up inside.
 
Depends on there availability etc
 

Reply to Vertical flue/ roofing query?? in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
220
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
113
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
214
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
428
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock