Search the forum,

Vaillant Turbomax diverter valve.

Post new thread

Discuss Vaillant Turbomax diverter valve. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Plumbcrazy56

Messages
128
Is there a special way of getting the actuator push rod to connect with the diverter valve spindle. I recently replace a diverter valve which came as 2 seperate parts, it took me over an hour to get the push rod to capture the spindle on the diverter body. The valve just kept getting stuck in the hot water position until I somehow managed to get them to engage correctly.
Thanks for any tips.
 
Are you gas safe registered engineer?
As administration team are about to pounce on this thread like a tonne if there are any source of information regarding the above link.
 
Then pm gas man with GSR details get your post in and you'll be sorted mate.
Sorry for inconveniently interrupting plumbcrazy...
 
As above. We can't discuss boiler repairs on an open forum. Thanks.
 
Status
Not open for further replies.

Reply to Vaillant Turbomax diverter valve. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Thermostatic diverter valves?
I have a heating system comprised of skirting radiators that form part of a loop from the boiler, round the house and back. Some rooms get warmer than others despite closing off the skirting radiator heat vent. They are designed to house the finned heating pipe and a return pipe, the latter...
Replies
0
Views
101
TonyR1
T
tappipe
shower bath diverter access mystery
I have a traditional style bath tap with shower attachment via a diverter. The lever no longer moves, and so I managed to unscrew the lever arm and the brass (colonial) piece, exposing the plastic diverter valve. Unfortunately, I am stumped as to how to get access to the diverter valve, as the...
Replies
3
Views
570
Robooo
Robooo
J
Diverter Valve / No Heating Help
Hi,

 Our heating stopped working today. We've got a Veissmann boiler that's under a year old, and an older Megaflow cylinder, and two diverter valves (all about 10 years old). We also use a Hive thermostat.

 When I boost the hot water with Hive, the receiver near the boiler shows it's...
Replies
1
Views
670
exedon2
exedon2
S
No heating flow. Pump and diverter working, what else could be wrong?
Hello all, I have a WorcesterBosch Greenstar 42CDi classic combi, which is providing DHW fine, but not heating. Was working fine in spring, probably not been used until recently now it's colder. When heating is called for, the boiler fires up ok but soon shuts down the heater as the...
Replies
11
Views
977
Stupot
S
J
    • Like
The mystery of the weeping shower valve...
I have an Arteform shower valve in my bathroom - top lever for the main shower head, middle for the handheld hose and bottom is the thermostatic control. The hot was not getting hot enough recently so (under instructions from the manufacturer) I removed the allen key valves bottom left and right...
Replies
1
Views
374
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Forum
Plumbing Advice
Tiling Tools
Electrical Forum
Electricians' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock