Search the forum,

Underfloor heating/boiler sizing

Post new thread

Discuss Underfloor heating/boiler sizing in the Central Heating Forum area at PlumbersForums.net

R

Robs21

Messages
5
Im refurbing my house and looking into underfloor heating downstairs.
What size boiler would be needed for
30m2 underfloor heating
1 bathroom
7 radiators (5 if ufh installed)
 
Heatloss each room / the ufh will give you there requirements
 

Reply to Underfloor heating/boiler sizing in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
230
PSxxxxxx
P
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
254
oz-plumber
O
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
218
ShaunCorbs
ShaunCorbs
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
279
oz-plumber
O
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
253
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
UK Tiling News
Tiling Forum UK
Tiling Tools for Beginners
Tilers Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock