Discuss Tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dsmart

Plumbers Arms member
Plumber
Gas Engineer
Messages
187
Hi there, I was luCky enough to get on an acs gas course with a local college.

I will be going on placement to complete my portfolio and need to know what tools to buy for this?

would help me no end if someone gave me a list

cheers

derek
 
U gauge
Torch
Flat head
Philips
Adjustable 8"
Pump pliers
Tape measure
Folding rule.
NOTE PAD
 
If you do a search you'll find loads of similar threads. However the above list is pretty good, add a pencil and some pipe slices and you're pretty much their!
 
Blow torch, solder, pump pliers, flux, tool box, pipe slicers, wire wool, spanners, leak detection fluid. Although you may be his tools whilst training but you will need them when working for yourself.
 
Thanks for the replies, what sort of blow torch etc should I buy can you give me a link?

cheers.
 
If you are building your portfolio you don't do any unsupervised work, therefore you don't need any tools, you should be assisting till you are ready to do something yourself then you should do the task the mentor is just about to do, so you should be using his/her gear, if you need your own tools you might be getting made to do work on your own, which isnt allowed
 
Derek smart one if the colleges I worked in doing the gas foundation course supplied a full kit for the candidates to use in college and it was theirs to take if they passed but they never took it on placement
 
Status
Not open for further replies.

Reply to Tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a gas engineer who I can work with so I can complete my portfolio. I have done level 2 and 3 tech cert along with bpec gas...
Replies
0
Views
492
Hi, I’m looking to retrain as a gas engineer and do a new entrants gas course. I’m a bit concerned by the ‘on-job’ work experience/shadowing, as...
Replies
1
Views
560
Hello I’m looking for work as a trainee/mate. I live in Lancashire and attended college in Leeds so don’t mind travelling anywhere in the north...
Replies
0
Views
927
Hi everyone My name is Daniel and I've recently completed my ACS gas engineer class room based work. I need to complete my portfolio. so is there...
Replies
7
Views
2K
    • Winner
    • Like
Hi all, I joined today and am a newbie at plumbing DIY. Thought I'd share my experience replacing the stopcock under my sink. The old one looked...
Replies
1
Views
566
Back
Top