Discuss Tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dsmart

Plumbers Arms member
Plumber
Gas Engineer
Messages
187
Hi there, I was luCky enough to get on an acs gas course with a local college.

I will be going on placement to complete my portfolio and need to know what tools to buy for this?

would help me no end if someone gave me a list

cheers

derek
 
If you do a search you'll find loads of similar threads. However the above list is pretty good, add a pencil and some pipe slices and you're pretty much their!
 
Blow torch, solder, pump pliers, flux, tool box, pipe slicers, wire wool, spanners, leak detection fluid. Although you may be his tools whilst training but you will need them when working for yourself.
 
If you are building your portfolio you don't do any unsupervised work, therefore you don't need any tools, you should be assisting till you are ready to do something yourself then you should do the task the mentor is just about to do, so you should be using his/her gear, if you need your own tools you might be getting made to do work on your own, which isnt allowed
 
Derek smart one if the colleges I worked in doing the gas foundation course supplied a full kit for the candidates to use in college and it was theirs to take if they passed but they never took it on placement
 
Status
Not open for further replies.

Reply to Tools in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock