Discuss Toilet Problem - Solidified mass in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

meger5

Hi There

There is a solidified mass on the base of the toilet bowl, think it might have solidified from some cleaning agent.

Any advice on how to remove ?

Its still fairly hard to the base.

All tip and advice greatly appreciated.

Thanks
Dave
 
Ask everyone in the property what cleaning agent has been used or who has put what in there before doing anything because some cleaning products can become acid when mixed with water.
 
Thanks for such a quick reply.

I'm unable to find out exactly what cleaning agent was used, but I understand its a general toilet cleaning brand, but for some reason solidified. Any suggestions ?
 
Put some mariogolds on or get a good black bin bag AND GET IT OUT BY HAND it wont hurt and you can always wash your hands afterwards - or call dyno rod and spend ÂŁ100 + - then chuck it in the bath for examination and post a piccy ........ Centralheatking
 
Caustic soda can become a hard solid mass if not mixed properly when dropped directly into
drains, toilets etc. Need to chip it out with a long chisel or screwdriver, the stuff is probably
dead but take no chances and wear eye protection and mask and avoid splashing.
 
Hi All

Many thanks for all your replies.

Its very hard and won't budge easily, its color is white.

Any easy suggestions in how to get rid of it ?

Dave
 
Its color is white and its totally hard....very difficult to budge!
Any suggestions most welcome!
 
Best way is to use a long screwdriver or chisel to start breaking it up BUT metal can damage the surface beyond repair so remove what you can then find a piece of wood to finish the job. Take your time and not to much brute force or you can break the pan.
 
I had an apprentice who put a load of plaster down a toilet once!
I would say that went down well but it didnt :)
 
Status
Not open for further replies.

Reply to Toilet Problem - Solidified mass in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi there I fitted a Sanicompact 43 about10 years ago. A few years ago i noticed that it would intermittently activate in the middle of the...
Replies
7
Views
374
Hi guys. I noticed when I was cleaning the toilet the other day that there are some large cracks just under the rim jet area of my toilet bowl...
Replies
2
Views
760
R
Hi all, I'm hoping someone on here will be able to help me with an issue I'm having at home. We've just returned from a week long holiday and have...
Replies
1
Views
667
Laurie1987
L
  • Question
Hello, I'm a homeowner, not a DIYer. I have an almost 1 year old SaniCompact Comfort wall-hung toilet which has worked flawlessly until about a...
Replies
0
Views
488
As part of a slow DIY bathroom refit I've removed the old toilet from the original location next to the soil pipe (and obviously capped off the...
Replies
4
Views
713
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock