W
Whyme
very nice, like it when blokes use pipe benders instead of elbow central..
Discuss Today's install. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
That's Cement wollySee it leaking already :angel_smile: Importantly did you remember the drain of on cold and air vent Vern told you off for last time?
Looks pretty damm tidy though
Hahah Near 3 bundles of 22 there.That room looks like a pikeys dream! Hope it's still there Monday! Lovely job mate. Nice to see someone who clearly takes pride in his work.
Really? None, though I haven't fully pressurised the new one yet as the mains pressure is pants and I'm installing a booster setup next week. I solder all day most days, 99% of the time I can tell if a joint doesn't take when I'm soldering it.So on the 2 Jobs how many leaks did u have?
So on the 2 Jobs how many leaks did u have?
Honestly mate I don't know, I just learnt, my bends are all by eye. Never even went to college so the tape measure rarely comes out for em. Experience beats all!How do you know where to bend when there's multiple bends on a full length? I got lost after more than 2 tbh. You must be on a good wage mate
Honestly mate I don't know, I just learnt, my bends are all by eye. Never even went to college so the tape measure rarely comes out for em. Experience beats all!
And for my wage, its acceptable, could be a lot better but my boss looks after me, has kept me in full time work for 11 years which I know isn't easy to do in the current climate so I respect him for that.
Do u not fancy goin self employed whn1?
T.B r u a jobs worth ??
Do u not fancy goin self employed whn1?
T.B r u a jobs worth ??
No he's a thoroughly bloody nice bloke!
T.B r u a jobs worth ??
could any one explain to me what does this mean ?
could any one explain to me what does this mean ?
Cheers , thanks for the explination I understand now ! In my understanding its simmilar to OCD
That is a good example, another 1, a customer of mine just moved into new house and I did some work there I then found a leak on a old boiler he said he has just took out boiler cover as he new the boiler was old...good idea, he rings b.g and the engineer comes out the next day an says the boiler isn't right, a few little not to current standrd things although the boiler is 17 years old. Then he realises he has just took the contract up an says he is not going to change the part as he new he was trying to take them for a fool, which he wasn't. It's not like the b.g engineer was paying for the part or effecting his profit/wages in the end the engineer was nasty and trying to sell a new boiler so the customer literally threw him out, and complained to which he has had the part done now and some discount. That is a jobs worth
See it leaking already :angel_smile: Importantly did you remember the drain of on cold and air vent Vern told you off for last time?
Looks pretty damm tidy though
Pls explain Vern "combi valve to be above bubble "
Pls explain Vern "combi valve to be above bubble "
Like this one i bashed in a nursing home, note coil AAV and DOC, also DOC on cold mains....combi vlave nice and high, you can just see secondary return on far left too :wink_smile:View attachment 11339
Nice work! when you gonna take me on some of these jobs eh? lol
Did you have to move those Miele washers vern? Jesus they weigh a ton lol. Had to plumb a few of those in my time.
Thats cracking stuff vern! Shame the electrics are flapping in the wind tho.
Had one this week Stan open vent cylinder DOC stuck solid, not the easiset postion to syphon eitherGood install , I understand now what you mean about the combi valve high , I could not see combi valve on Tonys . I have never had problem draining Megaflow from full to dry no more then 10 min as all comes out under this huge pressure unlike the open vent one where the doc never works or if they do cylinder will be full of lime scale
They better be Tom , for what they cost you can get : washing mashine+ dishwasher + small fridge for your beerYeah I've seen a few like that, nightmare to fit wastes cos they're not pumped, which is why they're often raised. Even worse when they block up. I bought a Miele for my house after seeing those commercials in care homes lol. Even my little domestic one is mega heavy.
aww i see no pumps eh? less to go wrong then.....Yeah I've seen a few like that, nightmare to fit wastes cos they're not pumped, which is why they're often raised. Even worse when they block up. I bought a Miele for my house after seeing those commercials in care homes lol. Even my little domestic one is mega heavy.
Reply to Today's install. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.