Search the forum,

knob

Howard Knob (variant: Howard's Knob) is a mountain in the North Carolina High Country, located in the town of Boone. According to the US Geological Survey, the mountain's proper name is Howard Knob, but it is known to locals and tourists as Howard's Knob. Howard Knob and the surrounding area are part of the Appalachian Mountain Range. The mountain has an elevation of 4,396 feet (1,340 m) above sea level, and rises nearly 1,000 feet (300 m) above the town of Boone and the campus of Appalachian State University.

View More On Wikipedia.org
Recent contents Top users
  1. T

    Ecostat S - unsecured temperature knob

    Hi All, The temperature knob on my Hansgrohe Ecostat S shower mixer has been installed insecurely and is loose when pulled, I've looked at the installation instructions and can't see if a part is missing. Any ideas?
  2. D

    looking for: Armitage shanks sink knob

    hi guys, i hope you're all ok and safe. im in need of a. Armitage shanks sink knob from the 70s if anyone has one or know who, please DM me thanks, stay safe
  3. M

    Help kitchen lever knob tap

    Hey my kitchen tap has lever knobs on both sides and the left one is leaking. Is there an easy way of fixing it?
  4. D

    Grohe Avensys Classic replacement control alternative

    The plastic temperature control knob on my Grohe Avensys Classic shower has broken. It's a small piece of chrome-effect plastic this size of a tuppence. The full assembly, including the replacement part is around £115. This is rather annoying as I only need the smallest part of the assembly...
  5. T

    Stiff shower temperature knob - does anyone know the cause?

    Hi all, Would really appreciate any advice. My shower temperature knob/dial on the right has suddenly become so stiff it does not move. So now jammed on the hot setting (and it's not even as hot asit should be either). It's relatively new - only installed about three months ago after a similar...
  6. T

    Shower tower unit make/model? Temp knob dripping issue

    Hi Can one of you you recognize brand/model of shower tower unit in attached image? Think it's a hudson reed but not sure and do not know the model; over 10y model. It has been dripping off the temp knob (bottom one of the 2) for a few weeks, getting gradually worse, looks it needs replacing...
    • Tech magos
    • Thread
    • america dripping issue knob shower temp tower usa
    • Replies: 1
    • Forum: USA
  7. I

    Unusual knob fixing - How to remove a tap knob with an unusual fixing?

    Is anyone familiar with the fixing on this 1960-70's "OSY" branded mixer tap knob? I am trying to change the washers but there seems to be no obvious way to remove the knobs. There is no screw or nut to release them. It might be push-fit but don't want to force it before confirming that is the...
  8. D

    Fit control knob to ideal combi 24

    Ideal combi 24 knob for off/hw/heating/reset needs replacing. I have new one but cannot work out where the spring fits in the new knob
  9. Davidw111

    Help! Any idea which knob is this?

    It’s really old and I couldn’t find it nowhere. Please help me with anything :) Thanks!!!!
    • Davidw111
    • Thread
    • america help knob usa which
    • Replies: 1
    • Forum: USA
  10. Gasmk1

    i see we have inherited a knob

    i see we seem to have a knob posting.
  11. Transistor

    Old Grohe mixer tap knob removal

    I need to replace the washers on this old (1980s?) mixer tap. Can anyone tell me how to release the knobs on these? It looks like a 4-way spring-action plastic clip and I can't feel anything like a screw in the bottom of it. Many thanks.
  12. S

    Triton Thames Dual. Flow control knob is not attaching HELP

    Novice here so please bear with Have a Triton Thames Dual Control and there have been no problems . The control/flow knob came off in hand and so I tried pushing it back into the spindle and it just won’t go back in properly and waggles around. I am not a total idiot and cannot see why this is...
  13. L

    Struggling to get divertor knob off shower mixer tap

    I've got one of the following taps, but the divertor knob is really stiff and difficult to lift up. It's not helped by the fact the knob itself is a simple straight flush finish so there's nothing to grip on...
  14. W

    Worcester greenstar 18ri purpose of the CH control knob on face

    Hi, I have a conventional Greenstar 18ri in a house I rent out. Can anyone explain to me in simple terms the function of the CH control knob on the front of the boiler? When it was installed, the engineer set the knob at about three quarters way round to the right and said that was about the...
  15. R

    Vaillant EcoPlus 837 - Radiator Knob fallen off in cold position

    Hello Hoping someone can help. I have just adjusted the radiator temp (first time in ages) on the Vallant Ecoplus 837 and the knob has come off in my hand. Does anyone know how to fit a new knob on this boiler ? Plumb center have these in stock - Vaillant 0020048969 So juust heading to...
    • RickTT
    • Thread
    • cold control engineer front knob panel position radiator spindle vaillant
    • Replies: 5
    • Forum: Plumbing Jobs | The Job-board
  16. Riley

    Itcanbesoeasy to be a knob!!

    Who is this joker?? Saying B&Q is better than a proper merchants? im positive it's do it myself Leo's mate. Can an we dispose of this idiot as he is trying to belittle regular contributors posts. Not helpful to our public
  17. R

    Faulty Gas Tap - Knob Missing

    Just completed a landlord cert and there was a hob belonging to the landlord with a missing control knob. I categorised it as At Risk purely on the basis that if it was turned on it would be difficult to turn off. Is this correct as I can't find an answer in my book.
  18. M

    Mixer knob won't come off

    Hi there, I'm no more than a DIYer do forgive my terminology. I have a concealed shower, the mixer knob has become wobbly not sure why, I wanted to remove it to see if there's anything I can do. I've removed the on/off knob no problems (just loosened the Allen screw and pull) but the mixer...
  19. S

    Gas fire not lighting after knob is released.

    Intermitent, piezo lights pilot perfectly and flame is over the tip of the thermocouple but often just goes out when button is released. Coal effect focal point fire. Other times it fires fine. There is a lever to a setting of coal or coke depending on what flame picture you prefer, would this...
  20. D

    Triton Caselona - On / Off knob - and Triton Year of Manufacture Code

    Triton Caselona - On / Off knob - and Triton Year of Manufacture Code Hi - my On/Off knob on my Casendra shower is faulty - I contacted Triton to get a replacement however they said I needed the to buy the front cover at £36 I have this shower in the flat I bought last August and dont have a...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock