Search the forum,

Discuss Recessed shower mixer recommendation in the USA area at PlumbersForums.net

Messages
2
Greetings. Stranger from the electrician's forum here. Need some plumbing advice please!
Our bathroom shower mixer is on surface.
IMG_1114.JPG The mixer needs changing and her indoors would like a recessed mixer.

The problem is that the wall is quite thin and i only have 6cm from front of tiles to the back of the stud wall. I've looked at a few mixers, including Grohe Rapido Smartbox, but most are too deep. Any suggestion would be helpful.
Note have high pressure feeds on cold and hot (Megaflo).

Mucho gracias.

TTC
 

Reply to Recessed shower mixer recommendation in the USA area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
218
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
264
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock