B
Discuss putting a second prv in line in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Apart from the increase risk of leaking I don't see the problem.
converting an old OV system to a sealed one the PRV goes ware you put it on the system or with the Robokit.
what if the first/old prv is jammed shut being as its knackered anyhow I would bin it for a new one, not for the next 2 weeks though
yes but we are talking a combi here,for one thing you are technically altering a safety device,thats where i see a problem
OK but technically isn't the pressure uniform across the whole system ?
yes,i dont see a issue with putting one elsewhere in the system,just inline with the old
Oh sorry do you mean one after the other i.e. install another on the discharge pipe from existing ?
If so then No way hosay. At a push I would cap the discharge & install elsewhere.
Apologies for the my misunderstanding.
At least that's my reckoning
At least that's my reckoning
You can't put remotely because you can isolate the heat source from the safety valve. With the flow and return isolation valves.
Reply to putting a second prv in line in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.