Search the forum,

Push fit pipe problem

Post new thread

Discuss Push fit pipe problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

I

Iankkk

Messages
2
I am trying to combine some push fit waste pipes that go directly into the outside drain. They are 34mm. Can anyone tell me where I can get this size? It all seems to be 32 or 40 mm. Thanks
 

Attachments

  • IMG_20191021_101241862.jpg
    IMG_20191021_101241862.jpg
    479.1 KB · Views: 8
11/4 aka 32mm if your combining it tho need to step it up a size eg if your putting two into one etc
 

Reply to Push fit pipe problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
288
ShaunCorbs
ShaunCorbs
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
113
Sonya K
S
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Lou
Lou
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
273
Chuck
C
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
211
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
Tiling Advice
UK Tiling Forum
Tilers Forum
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock