Search the forum,

Discuss programmable room thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

plumb_know

Plumbers Arms member
Plumber
Gas Engineer
Messages
549
Hi Everyone,

looking for some advise on central heating controls please, don't have much experience with them but soon to be gas safe and need to start learning more.

I have a customer who has called me because they have bought a property and they have a british gas up2 model time control which i believe is actually just a rebranded drayton lifestyle time control & RC plus programmable room thermostat which i also believe is just a rebranded drayton Digistat +3. The customer has contacted me as they are unable to control there heating & hot water properly.

I have yet to see the job and will be popping over tonight but my question is does the system require both a time control and programmable room thermostat as i thought the programmable room stat was a room thermostat and time control built into one?

Could the problem be that the time control and programmable room thermostat are canceling each other out when programmed to different times?

Model up2.jpgRC plus.jpg


sorry not sure how to rotate images.

Thanks in advance for any help
 
if wired correctly and heating left on cont on programmer then there wont be any problems as it will work from the stat for heating
 
Thanks gasmk1,

i will check heating is set to on when i go and look tonight.

appreciate the advice.

also are there any books you would recommend for me to get to learn central heating controls, fault finding and wiring?

thanks again
 
Status
Not open for further replies.

Reply to programmable room thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I've just noticed that with the CH programmer either selected off or timed off, the CH can still be controlled on/off at the room thermostat. HW is controlled by the same programmer and is operating normally. System is a pumped Y plan. I take it the programmer is fubar? Anything I can do to...
Replies
6
Views
755
Hi all, as it’s starting to get chilly at night, we’re thinking of having the heating on at night… well the wife is. Which led me to wonder whats the point of having a room stat when the radiators all have their own thermostat controls? We currently have just a time controller for the heating...
Replies
13
Views
996
M
I have a Honeywell 7 Day Electronic 2 Channel Programmer ST6400C programmer and a Honeywell T6360B1028 Room thermostat . My programming is on the on position. I turn my thermostat off. But it turns on after 10 mins . How do I fix this?
Replies
1
Views
701
Deleted member 120897
D
Hi, I just moved into a new house and it has a Glow Worm Compact 24c combi boiler and a ESI ESRTP4RF+ programmable room thermostat and I am wondering if it's worth turning on the optimum start and stop features? There is also something called TPI (chronoproportional control) but I'm not sure how...
Replies
6
Views
543
Looking for a gas safe engineer to complete a boiler and cylinder install in Ringwood BH24. There was a delay of approx 8 months from the install to radiators being fitted and therefore able to comission the system. Our plumber is now employed elsewhere and unfortunately unable to complete this...
Replies
2
Views
594
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock