Discuss plumb centre special... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
Usually don't go into plumb centre as expensive, but when they are close by and I need imperial fittings I do ( why does no one sell 1/2 olives?). They have a vailliant pro 24 and flue for £599 + vat and the pro 28 and flue for £630.

Not bad
 
Usually don't go into plumb centre as expensive, but when they are close by and I need imperial fittings I do ( why does no one sell 1/2 olives?). They have a vailliant pro 24 and flue for £599 + vat and the pro 28 and flue for £630.

Not bad

So does every one else, City plumbing/Plumbase Vaillant have offer on if you belong to installer club you can get extra warranty.
 
Rays still cheaper. Not by much I grant you that, but enough for a costa coffee and a twix....
 
Rays still cheaper. Not by much I grant you that, but enough for a costa coffee and a twix....

I just looked on Rays site and see he is. I told plumb centre he would be but they said profusely that they were the only ones getting that deal from vailliant. Will let them know next time I see them
 
Vaillant rep been around most outlets in Plymouth area dropping of promotional leaflets & posters
 
I just looked on Rays site and see he is. I told plumb centre he would be but they said profusely that they were the only ones getting that deal from vailliant. Will let them know next time I see them

Williams aren't getting the deal from vaillant. Rays writing his own rule book these days!
 
ive always found the pro,s good value only real difference is no drop down flap and the loop isnt included diagnostics are a cut down version as well but with 7 years guarantee thats not going to affect you for a while
 
Status
Not open for further replies.

Reply to plumb centre special... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
327
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
143
Hi All, Looking for a bit of advice on the best way to pipe this. - 24kW Worcester regular boiler in kitchen, approx. 9 years old - unvented...
Replies
16
Views
1K
Hoping someone knows a wiring centre that fits this requirement. I have 1 UFH zone (3 circuits) and 2 Radiator zones. Was looking at the...
Replies
5
Views
642
Fitting a vertical rad after having hallway replastered and after a bit of digging about online, I have two options for plumbing it in as pipes...
Replies
2
Views
609
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock