Search the forum,

Need advice for replacement British Gas Thermostat Radiator Valve

Post new thread

Discuss Need advice for replacement British Gas Thermostat Radiator Valve in the USA area at PlumbersForums.net

C

ColinDu

Messages
2
I’m looking for help in replacing my British Gas Thermostat Radiator Valve cover which is broken due wear & tear. Have been trying to contact British Gas directly for replacement spare part but without any success and have decided to purchase part myself. I’ve attached picture of my old TRV. As there are so many different makes out there I wanted to check that any replacement I source will be compatible fit.
 

Attachments

  • E4188B41-3BA9-49D3-9C28-9AEF0A18A49F.jpeg
    E4188B41-3BA9-49D3-9C28-9AEF0A18A49F.jpeg
    465.5 KB · Views: 20
The newer head should fit Drayton RT212 White / Chrome Angled TRV 15mm x ½ - https://www.NoLinkingToThis/p/drayton-rt212-white-chrome-angled-trv-15mm-x/958hg
 
Quite a lot of heads are interchangeable, British Gas don’t manufacture stuff, they use other manufacturers, such as Shaun has said, the Drayton.
 

Reply to Need advice for replacement British Gas Thermostat Radiator Valve in the USA area at PlumbersForums.net

Similar plumbing topics

T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
exedon2
exedon2
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Cutters
Contractor Forum
Tiling Tools
DIY Forum
Tilers Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock