Discuss Modifying a chimney cowell? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
hey folks. Is the above allowed or not? I’m thinking that by modifying it, it may become unfit for purpose? Cheers folks
 
hey folks. Is the above allowed or not? I’m thinking that by modifying it, it may become unfit for purpose? Cheers folks

Give us a clue, mate
digital-transformation-hr.jpg
 
Sorry chaps. It wasn’t something I modified and it was a complete false alarm. Basically I had to replace a clay vent pot for a metallic one. The fact that there was no gas fire at the bottom of the chimney made me laugh.
 

Reply to Modifying a chimney cowell? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
338
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
268
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
412
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
247
Back
Top