Search the forum,

Minutes silence for my hilti te-6a...

Post new thread

Discuss Minutes silence for my hilti te-6a... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

CES

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,477
Just went to get it out the van, battery dead, tried recharging - zilch,nada expired!... Now wondering if I should buy another battery ( about £150 + vat) or just go for another battery gun.. It was a 36V 3.0Ah li-ion battery... Got about 5 years out of it.
 
Go to your local Hilti place & see what they think.
They probably will recommend you buying complete new drill & it would be a good idea to have same batts. They do a money off if you hand in any old drill, but that would be silly if there's life in the old drill body still.
I find my local Hilti shop manager, Kevin, very decent & can do good deals, especially on consumables like a battery.
 
Status
Not open for further replies.

Reply to Minutes silence for my hilti te-6a... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
226
DIwhYdidIstartThis
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Chuck
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
229
Firefox
F
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
135
Stigster
Stigster
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock