Search the forum,

http://www.ukplumbersforums.co.uk/threads/alpha-cd35c-not-igniting.99783/#post-967245

Post new thread

Discuss http://www.ukplumbersforums.co.uk/threads/alpha-cd35c-not-igniting.99783/#post-967245 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I know ;) if she can answer that in detail it proves shes gas safe :D
 
Status
Not open for further replies.

Reply to http://www.ukplumbersforums.co.uk/threads/alpha-cd35c-not-igniting.99783/#post-967245 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
114
Lou
Lou
M
What's happening to this radiator, paint flaking off?
Rad is only a few years old. Paint is flaking away at the top curved section and it looks like faint spots of rust where the rad is now bare.
Replies
3
Views
189
Lou
Lou
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
oz-plumber
O
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock