Search the forum,

Hot water call every minute

Post new thread

Discuss Hot water call every minute in the Plumbing Jobs | The Job-board area at PlumbersForums.net

M

Mr Rakesh Patel

Messages
1
When a hot water tap is switched on in any part of my house the pipes near the cylinder or the cylinder make a noise. This is completely normal. Recently I have noticed especially at night that this noise is happening every minute for a few seconds and no hot water is beingcalled . Any ideas ???
 
Mr Rakesh Patel said:
When a hot water tap is switched on in any part of my house the pipes near the cylinder or the cylinder make a noise. This is completely normal. Recently I have noticed especially at night that this noise is happening every minute for a few seconds and no hot water is beingcalled . Any ideas ???
Click to expand...
Is this when everything is hot, cold heating on or off ? Is it a system set up,or is it a conventional,set up,with roof tanks ?
 
If you have a traditional type system with a hot water cylinder and a cold water storage tank in a loft area to supply it ? then often it can be noisey when water is used the ball valve falls to allow the storage tank to fill as hot water is used it maybe this you can hear. Kop
 

Reply to Hot water call every minute in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
294
John.g
J
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
208
PSxxxxxx
P
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
234
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electricians Talk
Tile News
DIY Talk
Tiling Forums UK
Tilers Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock