Search the forum,

Discuss Honeywell thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
1

1500

Hi,

We have a honeywell thermostat installed and a ideal mexico 455 floor standing conventional (?) boiler. The thermostat is between 19oC -22oC and seems to heat the house fine however, when the temp drops in the house and the boiler shuts down, it feels almost arctic in the house before the boiler kicks back in, when we try turning the thermostat up nothing happens. We've tried relighting the boiler but again nothing.

I seem to think it must be an issue with the thermostat as we still get hot water.

The heating is set to continuous and the hot water to twice a day.

Any help would be gratefully received

Thanks
 
Run the Hoover around it next time you are hoovering!
 
when you say that you relight the boiler, are you saying that the pilot light actually goes out?
 
Status
Not open for further replies.

Reply to Honeywell thermostat problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
Replies
8
Views
400
Hi I have changed my Honeywell T6360 thermostat to a Salus T105RF wireless thermostat. There was three wires going to the original honeywell thermostat. One of these being the supply and another going to the boiler. I wasn't sure what the other wire was and so didn't connect up. Now the Salus...
Replies
5
Views
855
Deleted member 120897
D
We have a Megaflo CL210 Cyclinder along with Evohome hot water kit and have come across a problem. We have had solar installed and a Myenergi Eddi solar diverter for hot water but when the Honeywell was originally installed they removed the bottom thermostat probe and inserted the Evohome...
Replies
8
Views
703
Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the outputs goes to a 2 port diverter prior to the Megaflo (I believe this is some safety feature). I have run into an intermittent problem where some...
Replies
5
Views
244
I have a home with an oil boiler in a garage turned into a flat, heating both flat and main house, running c plan with two pumps, two motorised valves simple bi-metal thermostat on wall in flat with 4 standard TRV's rarely used so not worried about the flat, and main house has Nest Gen 3 in the...
Replies
0
Views
375
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock