Discuss heatline c24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

ambrosia

Plumbers Arms member
Plumber
Gas Engineer
Messages
892
Is there a trick to getting the fan out of a heatline c24, had one today, old banger of a boiler. took the sole screw out, looked like fan would slide out, gave it a pull, nothing, gave it a slightly harder pull, fan didnt move but it started leaking out of the pipes which join the heat exchanger :32:
 
Status
Not open for further replies.

Reply to heatline c24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

So, I had an old and disgusting Geberit dual flush that didn't work very well, so I decided to replace it. Cistern is 110.830.00.1, so got a...
Replies
1
Views
337
Hello all, I have a WorcesterBosch Greenstar 42CDi classic combi, which is providing DHW fine, but not heating. Was working fine in spring...
Replies
11
Views
1K
    • Winner
    • Like
Hi all, I joined today and am a newbie at plumbing DIY. Thought I'd share my experience replacing the stopcock under my sink. The old one looked...
Replies
1
Views
559
Hello all, I'm looking for suggestions on heating controls. We'll be upgrading our boiler (To a modulating oil system boiler - EOGB Sapphire)...
Replies
0
Views
1K
With nothing to do today I thought I would do a spring clean on my Grant Vortex 26-36KW model so turned off power, removed door, and then removed...
Replies
1
Views
2K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock