- Messages
- 5,171
This is mutleys previous attempts at flues above first floor. Strange how he's been doing cp12 for last 7 years...... Sellotape, paper and some prolly fills on inside .
Ah thanks feller
Discuss HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net
This is mutleys previous attempts at flues above first floor. Strange how he's been doing cp12 for last 7 years...... Sellotape, paper and some prolly fills on inside .
This is mutleys previous attempts at flues above first floor. Strange how he's been doing cp12 for last 7 years...... Sellotape, paper and some prolly fills on inside .[/
QUOTE]
At least they used the collars on the top 2
Went to a leaky toilet just. Take your pick of where the leak was.
Seriously ? Big thing missing out of top
flues missing ? not a balanced flue i take itSeriously ? Big thing missing out of top
flues missing ? not a balanced flue i take it
Spoke with fitter from last year not cmc qualified didn't think it needs it with it been a trailer
found the 2 mb leak
Seriously ? Big thing missing out of top
found the 2 mb leak
how the feck do they get paid i cant get paid when its done well
how the feck do they get paid i cant get paid when its done well
Watching with interest.Have a similar one. One of our lads went to friends house she's got kids bbu been off for 6 weeks or so. LL trying to get her try for green steal. He went as he offered to replace thermocouple FOC. He called me as he was a little confused how the fire worked, it was flue less on front of Bermuda. Bbu failed spillage told him to cap and leave . No cp12 and now LL man is going tomorrow to reconnect. ......... Told Tennant to record him doing it as he said it's fine.
Mike,
This is where push-fit has brought us, its made joiner and plasters think they are plumbers of joe public
please tell me a plumber didn't do that above, where will it all end
ive said this before the three downfalls of this industry were plastic waste n soil ,combi boilers and pushfit
I am not convinced the downfall of the industry is down to new materiala and techniques I would attribute it to the fact that it is known who put the abomination in but they are still out there aloud to do it again. He should be struck off and have his qualifications / registrations revoked.ive said this before the three downfalls of this industry were plastic waste n soil ,combi boilers and pushfit
Rogue installers / service providers and cowboys qualified or otherwise are the problem not materials and techniques. We need a standards and regs policing body with real powers to condemn instalations over defects of all kinds and hold those responsible to account.
I'm glad this horror is a ' hide away ' cistern. :thinking:
Rogue installers / service providers and cowboys qualified or otherwise are the problem not materials and techniques. We need a standards and regs policing body with real powers to condemn instalations over defects of all kinds and hold those responsible to account.
thats never going to happen the gas side is regulated to within an inch of its life and the most popular page in the gas installer mag is the bad installs page
all regulation does is cost the good guys more and give the cowboys even more profit
Rogue installers / service providers and cowboys qualified or otherwise are the problem not materials and techniques. We need a standards and regs policing body with real powers to condemn instalations over defects of all kinds and hold those responsible to account.
I agree no further regulation for gas or any other plumbing is required. Just need to police it. My comments were as a reply to the post showing an abysmal unvented instalation aparently completed by a gsr still trading in the area. How is this allowed to continue. What are the regs good for if they cant even keep registered guys to maintain the standard or allow guys who cant work to the required standard to be registered in the first place.thats never going to happen the gas side is regulated to within an inch of its life and the most popular page in the gas installer mag is the bad installs page
all regulation does is cost the good guys more and give the cowboys even more profit
Reply to HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.