Search the forum,

Geberit dual pneumatic flush concealed cistern

Post new thread

Discuss Geberit dual pneumatic flush concealed cistern in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

B

Brian Morgan

I have a Geberit concealed cistern . This has a dual pneumatic flush, and has worked without any problems for a few years now. The short flush continues to work normally but the longer (6 litre) flush no longer flushes fully which results in solid waste not being flushed. I have checked the flexible tube and they appear to be in good order. Can you advise as to what my next step would be in resolving this issue.
 

Reply to Geberit dual pneumatic flush concealed cistern in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

B
Compatible flush plates with Geberit UP720 (8cm)
Hello all, We have a Geberit UP720 frame. The frame says depth 8cm. (There's also the UP320 frame, which I guess is 12cm.) We are looking at Geberit flush plates, e.g., Sigma10. Sometimes we read that UP720 is compatible with Sigma flushplats. However, sometimes flush plats are also advertised...
Replies
4
Views
547
Bjoern
B
T
How to remove a Roca dual flush operating plate for concealed cistern
I need to adjust the large flush button because water continues to run after the cistern has filled up and the button does not return to its proper position, it stays depressed. The small flush button is working OK. In which direction does the dual flush operating plate need to slide/be moved?
Replies
2
Views
681
talktalk
T
B
Weak flush - pneumatic button mech or flush valve?
I have a wall hung pan with a concealed cistern. The flush is the "old style" Grohe Eau2 dual flush pneumatic button. When pressed the flush valve lifts lightly and closes giving a very short weak flush. You can manually lift the flush valve in the cistern and it moves freely, flushes fine and...
Replies
1
Views
1K
Basher
B
E
wall hung toilet pan poor flushing question
A few years ago I installed a wall hung toilet pan in my last house which did not flush well when disposing of waste solids. The water would rise up to the rim then dissipate and usually required further flushing to complete the disposal. I don't recall the brand but the wall mounting frame was...
Replies
3
Views
352
Ben-gee
B
M
Pneumatic toilet flush is difficult to push
I’ve installed a Geberit concealed toilet cistern. It has a pneumatic dual-flush button. The flush button is very difficult to push, once pushed it does flush but it requires a lot of effort. Is this normal for a pneumatic flush button, can anything be done to make it easier to push?
Replies
2
Views
3K
mxo123
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock