Search the forum,

Discuss Compatible flush plates with Geberit UP720 (8cm) in the DIY Plumbing Forum area at PlumbersForums.net

Messages
20
Hello all,

We have a Geberit UP720 frame. The frame says depth 8cm. (There's also the UP320 frame, which I guess is 12cm.)

We are looking at Geberit flush plates, e.g., Sigma10. Sometimes we read that UP720 is compatible with Sigma flushplats. However, sometimes flush plats are also advertised as fitting "8 cm" or fitting "12 cm", but it doesn't seem to say "fits both 8 cm and 12 cm".

(edit) For example, Geberit WC flush control with electronic flush actuation, mains operation, for Sigma concealed cistern 12 cm, dual flush, with Sigma80 actuator plate, touchless - https://catalog.geberit.co.uk/en-GB/product/PRO_2159419 (116.090.SG.6) says "Geberit WC flush control with electronic flush actuation, mains operation, for Sigma concealed cistern 12 cm, dual flush, with Sigma80 actuator plate, touchless". So what frames is this compatible with? (This isn't a Sigma10, but the example is just for illustration).

Does anybody know whether the UP720 is compatible with all Sigma flush plates, or only with some? In particular, is the Sigma10 compatible with the UP720?

Many thanks!
 
Last edited:
Pretty sure all sigma plates will fit all sigma cisterns otherwise they would be a different name. The numbers I presume refer to cistern depth

I had issues with the colouring on some sigma plates a few weeks ago. I sent an email to [email protected] explaining what I needed and asked them for a phone call. They got back to me in a couple of hours with a technical rep and problem solved.
 
Pretty sure all sigma plates will fit all sigma cisterns otherwise they would be a different name. The numbers I presume refer to cistern depth

I had issues with the colouring on some sigma plates a few weeks ago. I sent an email to [email protected] explaining what I needed and asked them for a phone call. They got back to me in a couple of hours with a technical rep and problem solved.
Thank you - that's helpful. Have emailed them again just now. Though we had emailed that address before. I've suggested a call back as well.
 

Reply to Compatible flush plates with Geberit UP720 (8cm) in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
111
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock