Discuss External water main insulation? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

GQuigley67

Plumbers Arms member
Plumber
Gas Engineer
Messages
5,076
Replacing an external water main and Scottish water will be inspecting it after I'm done, I'm tryin to find insulation but have had no luck, the type that's in a duct you can put over pipe for when it enters property and where a minimum of 750mm can't be achieved.

Does anyone have copy of the BS?
 
Just the thing I was looking for thank you good sir, this will come in handy next time I do a water main, I decided to go with Armaflex class-o and put it into a cable duct, needed to order materials today so I have them for Friday.
 
Status
Not open for further replies.

Reply to External water main insulation? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, Got a strange grating noise when the mains water is running in a property I'm looking after. It's a ground floor flat, with a first floor...
Replies
2
Views
552
I have a CH boiler installation with a nice simple vertical condensate drain, down and out through the wall to a pipe outside. All is as it...
Replies
8
Views
506
my bathroom sink (installed 2017) was broken recently and needs replacing. on inspection there is no brand name and only a few markings so I'm...
Replies
1
Views
357
HI, Closing the internal house Stopcock located under the sink eventually stops water flowing from the kitchen tap or washing machine hose when...
Replies
5
Views
1K
Hi All After having pooling water on my drive, I dug down around to find: Black pipe poly/plastic dug 450mm deep spraying water at mains...
Replies
3
Views
586
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock