Search the forum,

Discuss Dishwasher leak in base in the DIY Plumbing Forum area at PlumbersForums.net

Messages
27
I have a dishwasher that has a leak into the base that's tripping the flood switch. I tip the water out and the dishwasher works fine. I do believe I tipped it after the last wash and nothing came out. But after a while later that day I tipped it and some water came out. I have opened up the base and I can see no leak from any pipes nor any damp around any connections. However, there does seem to be damp from the two white plastic pieces in the attached picture. Can someone please advise what these are for?

Thanks
 

Attachments

  • PXL_20221117_044803390.jpg
    PXL_20221117_044803390.jpg
    226.4 KB · Views: 10
  • PXL_20221117_044748327.jpg
    PXL_20221117_044748327.jpg
    461.2 KB · Views: 10
I can’t see any white plastic pieces. How old is the machine?
Hi, see attached marked up pictures. The machine is 18 to 24 months old. Those plastic pieces seem to be some sort of a small funnel and they have a wee small spout at the end of them and there seems to be drips coming out of them. But they are open on the top and there is no pipe feeding into them. Thanks
 

Attachments

  • PXL_20221117_044742185~2.jpg
    PXL_20221117_044742185~2.jpg
    477.4 KB · Views: 7
  • PXL_20221117_044803390~2.jpg
    PXL_20221117_044803390~2.jpg
    240.7 KB · Views: 7

Reply to Dishwasher leak in base in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
228
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
224
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
241
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock