Search the forum,

Discuss course question - what is you answer? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

rocketmanbkk

Plumbers Arms member
Plumber
Messages
4,113
Friends

Heres a question for all you salty seadog plumbers!

The communication pipe turns into the supply pipe (underground), now then, this pipe is sleeved underground near the property.

Why is this pipe sleeved?

I know the answer (now) but all on my course got it wrong on a resent test (practice).

Any answers?

Look forward to reading them.

Regards to you all.

Rocket
 
Does the pipe go under the building? If not, surely it's for mechanical protection and protection against stress caused by ground movement.
 
Wheeto, thanks for being brave enough to answer 1st.

I'll tell you what the correct answer is soon enough (what C&G say which is different to what we hav ebeen told and read for the last 8 weeks!!!)

Come on all, get answering as I know your all dying to know the answer!!!!
 
Thanks everyone for taking part!!!

It's, as C&G state because of ground movement.

The tutor told us, as does teh book it was for corrosion but ground movement is what C&G say.

Cheers all.
 
Ground movement?

?????????

As if.

What happens if this "ground movement" goes along the length of pipe where there's no movement?

Honestly!!
 
From FireSafe.org.uk:


[h=2]Which Portable Fire Extinguishers to Use[/h]
Fires involving freely
burning materials. For example wood, paper, textiles and other
carbonaceous materials.
Fires involving flammable
liquids. For example petrol and spirits. NOT ALCOHOL OR COOKING
OIL.
Fires involving flammable
gasses. For example propane and butane.
Fires involving flammable
metals. For example magnesium and lithium.
Fires involving electrical
equipment. For example photocopiers, fax machines and computers.
Fires involving cooking
oil and fat. For example olive oil, maize oil, lard and butter.
 
I remember this question that is genuine and was in my City and Guilds paper way back in 1982!

If you discover a gas leak in a room what is the best course of action:
a) Open all doors and windows and allow ventilation
b) Bale the gas out with a bucket
c) Isolate the gas supply
d) Find the leak with a lit taper

All you GSR's out there that answered B and D, shame on you! LOL
 
Golly - were they asking silly questions back then as well? I thought this was only post Blair.
 
I remember this question that is genuine and was in my City and Guilds paper way back in 1982!

If you discover a gas leak in a room what is the best course of action:
a) Open all doors and windows and allow ventilation
b) Bale the gas out with a bucket
c) Isolate the gas supply
d) Find the leak with a lit taper

All you GSR's out there that answered B and D, shame on you! LOL

e) run away

I've used a variation of b) with an LPG leak, sweep it out with a broom.
 
Status
Not open for further replies.

Reply to course question - what is you answer? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
211
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
265
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
283
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
367
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock